20cm / 15cm 12V Universial Bubble LED Light Shift Knob Gear Stick Drift Shifter
$16.78
- Product Code: ED0008421
- Availability: In Stock
- Ex Tax: $16.78
Available Options
Feature:
● Selection of upscale, fine workmanship
● Transparent design, not stamped, and not showing bubbles
● New colorful breathing light, colorful
● Universal mobile phone cables and jacks, both charging and lights
● IRISis security connected, safe and relisble without leaks
Specification:
Knob color |
Transparent |
Lighting color |
Blue |
Material |
Metal, Plastic (Acrylic) |
Length |
200mm / 150mm |
Voltage |
12V |
Suitable models |
Gear rod is available on the thread. (Manual transmission: reverse file can not be used to mention, such as Cruze) (Automatic: reverse button with the lock can not be used) |
Product accessories |
with 3 different screw diameter screw thread, respectively 8 mm, 10 mm, 12 mm, with a cigarettes lighter and lamp beads! |
1.The original car's gearshift head removed, directly into the bubble row of the first gear, the rotation can be fixed fastening, with the exclusive head of the cigarettes lighter, directly with the cigarettes lighter into the car cigarettes lighter socket, power is Can be lit .
2.If you want it to light, just plug the cigarettes lighter into the place, if that day is not convenient, you can unplug the plug.
3.If 1 day you want to change him, want to change the other feeling, you can reverse his rotation to remove it.
4.High-end, beautiful bubble with crystal lamp shift head, so you take on the ease, very convenient.
Adjustable braces Structures, installation instruction:
1.Removal of the original gear head
2.Select aperture, corresponding to the pitch adjustable braces, spinning into a new gear-head bottom mounting hole.
3.Light trap into the bottom mounting hole.
4.New gear head screw on the original shift levers.
5.Adjusting the stop position, connected with the charging cable aperture and USB charger.
Fiting Instruction:
1. Remove your existing Gear Shift Knob. (Most Gear Shift Knobs unscrew from the original shaft).
2.If needed, find the correct plastic adaptor provided with the Gear shift Knob and place it over the shaft.
3.Lossely screw the three allen screws provided into the Gear Shift Gear.
4.Place the Gear Shift Knob overthe shaft (and adaptor, if applicable) and tighten three allen screws evenly, being careful not to over tighten.
Note:
1.This gear head requirements file rod diameter less than 12mm original can be removed!
2.Manual transmission: reverse gear can not be used to mention up!
3.Automatic: no button OD lock can be used!
Package Included:
1 X |
Shift Knob |
1 X |
Charging Cable |
1 X |
Car Cigarettes Plug Adapter |
3 X |
Threaded Adapter |
