5.5inch X3 ELM327 Car HUD Head Up Display with bluetooth Function OBD2 Interface Plug
$51.37
- Product Code: ED0006391
- Availability: In Stock
- Ex Tax: $51.37
X3 5.5inch Car HUD Head Up Display with bluetooth Function OBD2 Interface Plug
This HUD built in ELM327 and with bluetooth version function. Not only you can use the HUD to read all the information
on windowscreen, but also you can download OBD APP from Android phone to read more information.
The methods are below:
1. Download OBD App from phone
2. Open bluetooth of phone to scan,when display“HUD bluetooth”, click connect. The password is 1234
3. Open OBD App, click setting and adapter to connect
4. When finish connection,back to OBD APP interface to read more information.
Feature:
1.Plug and play. HUD can automatically adapt to vehicle type which in line with OBDII or
EUOBD(On-Board Diagnostic System).
2.Comprehensive display. HUD can display many parameters at the same time as follows,
vehicle speed, engine speed, water temperature (voltage, throttle valve position, ignition advance angle,
time of 100 km acceleration),fuel consumption, mileage, low fuel tips, engine failure.
3.Three display mode. Driver can chose normal display mode, high- speed display mode and automatic display mode.
4.Free switch. Km and mile can be switched freely.
5.Suitable size. The display area is 5.5 inches which is very clear for driver to read data.
6.Automatic power on and off. Starting with the vehicle starting, stopping with the vehicle stopping to protect the vehicle’s battery.
Moreover, HUD can alsopower on and power off by manual, which is more easy to control HUD.
7.Flexible alarm mode. HUD can offer single-stage and four-stage overspeed alarm modes to choose to make driving safer.
8.Engine speed alarm. It contributes to shift gear in time to save fuel also has significance to new driver.
9.Flexible brightness adjustment. The brightness can be adjusted automatically or manually to reach the best state which
is in harmony with the environment.
Specification:
1. Service conditions:
Environment temperature: -400℃ ~ +800℃
Barometric press: 86 ~ 106 KPa
Relative humidity: 10% ~ 95%
Environment voice: ≤60 dB(A)
2. Alarm of sound level: ≥30dB(A)
3. Work voltage: 9V~16Vdc(12Vdc/400mA)
4. Size of product: 150 * 85 * 14 (mm)
5. Weight of product: 278g (including the giftbox)
Package Included:
1 X X3 Car HUD Display
1 X OBD II Interface
1 X English User Manual
,,,,,,,,
This HUD built in ELM327 and with bluetooth version function. Not only you can use the HUD to read all the information
on windowscreen, but also you can download OBD APP from Android phone to read more information.
The methods are below:
1. Download OBD App from phone
2. Open bluetooth of phone to scan,when display“HUD bluetooth”, click connect. The password is 1234
3. Open OBD App, click setting and adapter to connect
4. When finish connection,back to OBD APP interface to read more information.
Feature:
1.Plug and play. HUD can automatically adapt to vehicle type which in line with OBDII or
EUOBD(On-Board Diagnostic System).
2.Comprehensive display. HUD can display many parameters at the same time as follows,
vehicle speed, engine speed, water temperature (voltage, throttle valve position, ignition advance angle,
time of 100 km acceleration),fuel consumption, mileage, low fuel tips, engine failure.
3.Three display mode. Driver can chose normal display mode, high- speed display mode and automatic display mode.
4.Free switch. Km and mile can be switched freely.
5.Suitable size. The display area is 5.5 inches which is very clear for driver to read data.
6.Automatic power on and off. Starting with the vehicle starting, stopping with the vehicle stopping to protect the vehicle’s battery.
Moreover, HUD can alsopower on and power off by manual, which is more easy to control HUD.
7.Flexible alarm mode. HUD can offer single-stage and four-stage overspeed alarm modes to choose to make driving safer.
8.Engine speed alarm. It contributes to shift gear in time to save fuel also has significance to new driver.
9.Flexible brightness adjustment. The brightness can be adjusted automatically or manually to reach the best state which
is in harmony with the environment.
Specification:
1. Service conditions:
Environment temperature: -400℃ ~ +800℃
Barometric press: 86 ~ 106 KPa
Relative humidity: 10% ~ 95%
Environment voice: ≤60 dB(A)
2. Alarm of sound level: ≥30dB(A)
3. Work voltage: 9V~16Vdc(12Vdc/400mA)
4. Size of product: 150 * 85 * 14 (mm)
5. Weight of product: 278g (including the giftbox)
Package Included:
1 X X3 Car HUD Display
1 X OBD II Interface
1 X English User Manual
,
,
,
,
,
,
,
,
