Open type round head pull stud product description:
It is divided into two parts: the rivet body (nail shell) and the nail core. The part where the riveting body produces plastic deformation, clamps two workpieces, and realizes riveting and fastening; the nail core type promotes the plastic deformation of the riveting body.
First, let's briefly review the structure of the shock absorber. Because in order to improve performance, most modified shock absorbers are single-tube shock absorbers. Let's take the monocular as an example:
What is a diffuser?
For the current F1 car, the chassis, engine and suspension are the necessary components of a car, and the rest of the components are installed to meet the needs of aerodynamics, which is what we often call "aerodynamic kits". ".
As an important component of the car ignition system, the ignition coil is often ignored by many drivers, which leads to a lot of car problems. Next, let us talk about the common faults and causes of the ignition coil!
Main Points of Modification of Pneumatic Shock Absorber
Pneumatic modification is a kind of shock absorber that controls the height of the vehicle body through air pressure. Its working principle is to change the height of the vehicle body by controlling the air pressure, including elastic rubber airbag shock absorbers, air pressure control system, trunk air storage tank and electronic control system.
Some little knowledge about exhaust modification
How does the exhaust system work?
The function of the exhaust system is to discharge the exhaust gas in the cylinder into the atmosphere with as little exhaust resistance and noise as possible. The exhaust system mainly includes exhaust manifold, exhaust pipe and muffler. Exhaust gas is discharged from the exhaust port connected to the combustion chamber, through the exhaust manifold, the front and middle section of the exhaust pipe (including the three-way catalytic converter) and the tail section of the exhaust pipe (commonly known as the tail row), and finally discharged into the outside air.
Brake kit modification tips
For the modification of the brake system, I believe that many friends who play cars are no strangers, so before modifying, have you ever thought about why you need to modify it? Is it because it looks good? Or improve the braking performance of the car?
The use of car inverter
Because the inverter is an electronic product, the design engineer has conceived all possible problems in all aspects before the design, so as to realize a more humanized product on the circuit. Therefore, general inverters will have protection circuits in three aspects: overvoltage, low voltage and power. But for inverters larger than 300W, not only the above-mentioned protections are included, but also additional circuits such as temperature, low-voltage alarm, and fan power control are added. Therefore, we will encounter many different operating errors during use.
To choose a good inverter, you should pay attention to the following issues:
1. Be sure to choose metal shell products: due to the large power of the vehicle inverter, the heat is also large. If the internal heat cannot be dissipated in time, the life of the components will be affected at least, and there will be a risk of fire if it is serious. The metal casing, on the one hand, has good heat dissipation characteristics, and on the other hand, it will not burn. Products with plastic casings are best not to be used. Even if a fan is added to help dissipate heat, one is to increase the noise during use, and the other is that the working life of the fan is generally relatively short, which reduces the reliability of the whole machine. If one day it stops, the consequences will be serious.