29Pcs Car Body Dent Repair Tool PDR T-rod Puller Set with Pulling Tabs
$31.92
- Product Code: ED0007285
- Availability: In Stock
- Ex Tax: $31.92
Features:
- Come with 28 different sizes puller tabs.
- Designed to repair auto body small damage easily by manual operation.
- It is environmental protection and does not damage the original paint.
- Easy to control, suitable for any person to operate, repair the dent for yourself directly.
- Uses different size glue tabs to different dent.
Specification:
Color: Silver
Name: Dent Removel T Bar
Material: Iron + aluminum + plastic
How to use the repair kits:
1.Clean the dent with a clean wet cloth.
2.Mount the glue stick into the glue guns,pull the trigger to let the glue stick enter into the glue guns, connect the power source
and preheat for 5 minutes.
and preheat for 5 minutes.
3.Use a proper drawing gasket. Large dent requires a large drawing gasket.
(Note: The larger the drawing gasket is, the larger the drawing force is).
4.Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue).
5.Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres
(Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter).
(Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter).
6.Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent.
7.Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen.
8.Clean the repaired place with a clean wet cloth.
Package Included:
1 X Pc Dent Removel T-Bar Tool
28 X Pcs Glue Pulling Tabs
