Brake Pipe Line Repair Flaring Kit Pipe End Flarer Cutter Bender 25Fit 3/16'' OD Roll With 15Pcs Nuts

$66.94

  • Product Code: ED00010693
  • Availability: In Stock
  • Ex Tax: $66.94

Tags: 25Fit 3/16'' OD Brake Pipe With Repair Flaring Kit

Specification:

Condition: New
Material: High-grade steel + Aluminum alloy + Iron plating copper
Color: Red
Tube Bender size: 1/4", 5/16", 3/8" OD Tube (6mm,8mm,10mm)
Tube Cutter size: 1/8" to 1-1/8" (3mm-28mm)
Bend diameter range: 1/4",5/16",3/8" (6mm,8mm,10mm)
Bend angle: ≥180°
Brake Pipe length: 7.62 meters
Brake Line Tubing diameter: 3/16 in. O.D.( note:3/16"≠1/4" )
Brake Line Tubing Wall thickness:0.028 in / 0.71mm
5 Adaptors: 4.8mm Through 12.7mm (3/16", 1/4", 5/16", 3/8", 1/2")
Quantity: 25pcs/set

Features:
1.A quality tools set for use in garages, workshops, by metal workers, plumbers, engineers, light wrought iron work etc.
2.Perfect for overhauling you corroded brake lines like for like or even replacing small sections using the female connectors which enable you to add sections into your original braking system.
3.A great value item,very simple to use,suitable for many type's of braking systems.

Brake Line Tubing:
1.High bursting strength, high vibration-fatigue limit.
2.It won’t rust,corrosion resistance, extremely easy to bend by hand and flare by simple tools.
3.It is also widely suitable for household, industrial and commercial uses,such as,oil pressure gauge pipe, fuel lines, brake lines and similar devices in the automotive, refrigeration, and heater manufacturing industries.

-Tube Cutter:
1.Accurately and efficiently cuts pipe between 3mm - 28mm diameter (1/8" - 1-1/8").

-Tube Pipe Bender Tool:
1.Accurately bends tubing / pipe up to 180 degrees. Suitable for 6mm, 8mm and 10mm pipe.

-7 Piece Double Flare Brake Line Flaring Hand Tool Kit:
1.Special design for double or single flare in copper, aluminium, soft steel brake line and brass tubing up to 45 degrees.
2.Can Be Use to Make Single Or Double Flares.
3.For Copper, Brass, Aluminium & Soft Steel Pipes.
4.Floating Cone for Accurate Alignment.

Package includes:
1x Copper Brake Line Tubing - 7.62 Metres (25ft) length - 4.76mm (3/16") diameter
1x Tubing Cutter
1x Oversize Pipe Bender 6 8 10mm, 0 - 180 degrees
7x Double Flare Brake Line Flaring Hand Tool Set Kit With Case
15x Nuts

Note:
1.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.
2.Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)
3.There are no instruction included!Professional Installation Is Highly Recommended!!If you want to know how to use or install it,please contact us by Email.We will provide help as much as possible.


Brake-Pipe-Line-Repair-Flaring-Kit-Pipe-End-Flarer-Cutter-Bender-25Fit-316-OD-Roll-With-15Pcs-Nuts-1705507

Brake-Pipe-Line-Repair-Flaring-Kit-Pipe-End-Flarer-Cutter-Bender-25Fit-316-OD-Roll-With-15Pcs-Nuts-1705507

Brake-Pipe-Line-Repair-Flaring-Kit-Pipe-End-Flarer-Cutter-Bender-25Fit-316-OD-Roll-With-15Pcs-Nuts-1705507

Brake-Pipe-Line-Repair-Flaring-Kit-Pipe-End-Flarer-Cutter-Bender-25Fit-316-OD-Roll-With-15Pcs-Nuts-1705507

Brake-Pipe-Line-Repair-Flaring-Kit-Pipe-End-Flarer-Cutter-Bender-25Fit-316-OD-Roll-With-15Pcs-Nuts-1705507

Brake-Pipe-Line-Repair-Flaring-Kit-Pipe-End-Flarer-Cutter-Bender-25Fit-316-OD-Roll-With-15Pcs-Nuts-1705507

Brake-Pipe-Line-Repair-Flaring-Kit-Pipe-End-Flarer-Cutter-Bender-25Fit-316-OD-Roll-With-15Pcs-Nuts-1705507

Brake-Pipe-Line-Repair-Flaring-Kit-Pipe-End-Flarer-Cutter-Bender-25Fit-316-OD-Roll-With-15Pcs-Nuts-1705507

Brake-Pipe-Line-Repair-Flaring-Kit-Pipe-End-Flarer-Cutter-Bender-25Fit-316-OD-Roll-With-15Pcs-Nuts-1705507


Write a review

Note: HTML is not translated!
    Bad           Good
Captcha