Car Digital Radio Receiver USB DAB RDS Non-screen Display European General
$35.36
- Product Code: ED0002683
- Availability: In Stock
- Ex Tax: $35.36
Car Digital Radio Receiver USB DAB RDS Non-screen Display European General
Specification:
Power: USB-A DC-in
DAB /DAB+ receiver frequency range of DAB band III : 174.0MHz-240.0MHz
lSupport auto local searching.
lSupport RDS function.
Antenna :3m cable car use active film antenna
Feature:
- This digital audio broadcasting device is fully compatible with DAB ETSI 300 401 standard. Support ETSI TS102 563 DAB+ standard
Operation:
- First, installation the active antenna.
- Plug the dab+U receiver to the USB jack and select the USB source from your car or other MP3 player, If in doubt how to select the USB source, please check the user guide of your Bluetooth box.
- Press the key to scan. The scanning the led Red and green sparkling. When it is finished the DAB device will reboot and the first DAB channel from the list of available stations will be selected and played automatically once the buffering is finished. Please note: all available stations will be listed as MP3 files in the root folder after scanning .
- Buffering (the device loads the data ahead of the player )is required to compensate internal or external (signal loss)factors in order to keep the playback from stuttering.
- The total buffering time usually takes 8-15seconds( within this time the status indicator led is flashing )
- You can select a different channel by pressing the NEXT/PREVIOUS track button on your Car media or other MP3 player.
- The signal is good always green. when the signal is loss or weak the red light on or red-green sparkling
Product Maintenance:
- Don’t expose the unit to the liquid, humid or moist area as the set is not water proof.
- Don’t attempt to clean this unit with chemical solvents as this might damage the finish.
- Avoid extremes of temperature either hot or cold, recharge under normal temperature.
- Don’t touch sharp objects, which will cause scratches or damage
- Don’t attempt to insert any object into the body to avoid damage the internal parts.
- Don’t attempt to disassemble the unit for there is not any serviceable parts inside.
- If long time no use, be sure to play the unit in a dry area, avoid in a temperature changes and dusty place.
Accessories:
1 x DAB receiver
1 x Car use active antenna
1 x Unit user guide
Specification:
Power: USB-A DC-in
DAB /DAB+ receiver frequency range of DAB band III : 174.0MHz-240.0MHz
lSupport auto local searching.
lSupport RDS function.
Antenna :3m cable car use active film antenna
Feature:
- This digital audio broadcasting device is fully compatible with DAB ETSI 300 401 standard. Support ETSI TS102 563 DAB+ standard
- This product is suitable for all types of vehicles, without installing any APK software, without FM launch, just can read U disk playback.
- Plug and play, plug the device into the car's USB playback interface, and then adjust the car's audio equipment to the U disk playback mode to read the received DAB signal.
- Plug and play, plug the device into the car's USB playback interface, and then adjust the car's audio equipment to the U disk playback mode to read the received DAB signal.
- First, installation the active antenna.
- Plug the dab+U receiver to the USB jack and select the USB source from your car or other MP3 player, If in doubt how to select the USB source, please check the user guide of your Bluetooth box.
- Press the key to scan. The scanning the led Red and green sparkling. When it is finished the DAB device will reboot and the first DAB channel from the list of available stations will be selected and played automatically once the buffering is finished. Please note: all available stations will be listed as MP3 files in the root folder after scanning .
- Buffering (the device loads the data ahead of the player )is required to compensate internal or external (signal loss)factors in order to keep the playback from stuttering.
- The total buffering time usually takes 8-15seconds( within this time the status indicator led is flashing )
- You can select a different channel by pressing the NEXT/PREVIOUS track button on your Car media or other MP3 player.
- The signal is good always green. when the signal is loss or weak the red light on or red-green sparkling
Product Maintenance:
- Don’t expose the unit to the liquid, humid or moist area as the set is not water proof.
- Don’t attempt to clean this unit with chemical solvents as this might damage the finish.
- Avoid extremes of temperature either hot or cold, recharge under normal temperature.
- Don’t touch sharp objects, which will cause scratches or damage
- Don’t attempt to insert any object into the body to avoid damage the internal parts.
- Don’t attempt to disassemble the unit for there is not any serviceable parts inside.
- If long time no use, be sure to play the unit in a dry area, avoid in a temperature changes and dusty place.
Accessories:
1 x DAB receiver
1 x Car use active antenna
1 x Unit user guide
