L1 Head-up Display Digital Display HUD Speed Water Temperature Voltage OBD + Alarm Monitor For Vehicles Universal
$23.99
- Product Code: ED0016898
- Availability: In Stock
- Ex Tax: $23.99
Description:
【Multi Function Display】
Display of vehicle speed,digital speedometer, water temperature and voltage.
【Alarm Function】
Over-speed alarm, high water temperature alarm, low voltage alarm, gear shift reminder.
【OBD2】
Applicable models: cars with OBD2 interface only.
Specification:
| Material |
Elecdeer |
| Colour |
black |
| Size |
about 80*45*13mm/3.15*1.77*0.51 inch |
| Voltage |
OBDII 12V |
| Maximum current |
150Ma |
| Standby current |
<20Ma |
| Sleep standby current |
<6Ma |
| Operating temperature |
-40℃~85℃ |
| Cable length |
about 180cm/70.87 inch |
| Weight |
about 190g |
| Applicable models |
cars with OBD2 interface |
Installation Process:
Step 1: when the vehicle is turned off, plug the other end of the OBD cable to the HUD host.
Step 2: vehicle ignition starts.
Step 3: plug the OBD cable into the car OBD socket.
Note:
Please do not operate in the flame-out state, otherwise it may cause the head up display to stay on and consume power!!!
Display the mileage after flame-out (because the maximum display value is 199, when the mileage value is greater than 199, it will be counted again,such as the actual 250KM, the display value is 250-199=51).
Package Included:
| 1 X |
HUD Module |
| 1 X |
OBD Line |
| 1 X |
Operation |
| 1X |
Sticker |
| 1 X |
Lens Hood |
| 1 X |
Reflector Film |
